Parkside 311912 Скачать руководство пользователя страница 12

PBH 1050 B2

GB

IE

NI

CY

 9

 

Warranty period and statutory claims for 
defects

The warranty period is not prolonged by repairs 
effected under the warranty. This also applies to 
replaced and repaired components. Any damage 
and defects present at the time of purchase must 
be reported immediately after unpacking. Repairs 
carried out after expiry of the warranty period shall 
be subject to a fee.

Scope of the warranty

This appliance has been manufactured in accordance 
with strict quality guidelines and inspected meticu-
lously prior to delivery.
The warranty covers material faults or production 
faults. The warranty does not extend to product parts 
subject to normal wear and tear or fragile parts such 
as switches, batteries, baking moulds or parts made 
of glass.
The warranty does not apply if the product has been 
damaged, improperly used or improperly maintained. 
The directions in the operating instructions for the 
product regarding proper use of the product are 
to be strictly followed. Uses and actions that are 
discouraged in the operating instructions or which 
are warned against must be avoided.
This product is intended solely for private use and 
not for commercial purposes. The warranty shall be 
deemed void in cases of misuse or improper handling, 
use of force and modifications/repairs which have 
not been carried out by one of our authorised 
Service centres.

Warranty claim procedure

To ensure quick processing of your case, please 
observe the following instructions:

 

Please have the till receipt and the item number 
(e.g. IAN 12345) available as proof of purchase.

 

You will find the item number on the type plate, 
an engraving on the front page of the instructions 
(bottom left), or as a sticker on the rear or bot-
tom of the appliance.

 

If functional or other defects occur, please 
contact the service department listed either by 

telephone

 or by 

e-mail

.

 

You can return a defective product to us free of 
charge to the service address that will be provided 
to you. Ensure that you enclose the proof of 
purchase (till receipt) and information about 
what the defect is and when it occurred.

NOTE

 

For Parkside and Florabest tools, please send 
us only the defective item without the acces-
sories (e.g. battery, storage case, assembly 
tools, etc.).

You can download these instructions 
along with many other manuals, 
product videos and software on 
www.lidl-service.com.

Service

 

WARNING!

 

Have the power tool repaired by the service 
centre or a qualified electrician and only 
using genuine replacement parts. 

This will 

ensure that the safety of the appliance is 
maintained.

 

Always ensure that the power plug or the 
mains cable is replaced only by the manu- 
facturer of the appliance or by an approved 
customer service provider. 

This will ensure 

that the safety of the appliance is maintained.

 Service Great Britain 

Tel.: 0800 404 7657 
E-Mail: [email protected]

 Service Ireland 

Tel.: 1890 930 034 

(0,08 EUR/Min., (peak)) 
(0,06 EUR/Min., (off peak)) 
E-Mail: [email protected]

CY

 Service Cyprus 

Tel.: 8009 4409 
E-Mail: [email protected]

IAN 311912

Содержание 311912



































Отзывы: