Parkside 306278, Инструкции по эксплуатации и безопасности

Страница: 24 / 100

24 GB/IE
The display
5
is covered by protective film to protect from transport damage.
First remove the protective film.
To operate the product, insert the included battery (9 V block). Proceed as described
below:
Inserting / changing the battery
To insert / change the battery
13
, open the battery cover
4
. To do so, slide
the battery cover in the direction of the arrow and flip open.
If applicable, remove the old battery and insert a new one. If necessary, clean
the contacts of the battery compartment and the battery. Only use a 9 V block
battery type 6F22 or 6LR61.
Ensure the correct polarity when inserting the battery. This is indicated on the
battery cover (Fig. C).
Close the battery cover.
Your infrared thermometer is now ready for use.
Start-up
Hold the handle of the product so the index finger can operate the Measure
button
3
and the thumb buttons
10
to
12
.
Switching on and off
Press the Measure button
3
to switch on the product. The display
5
will
light up and a brief tone will sound.
Press and hold the °C / °F / SET button
11
for approx. 3 seconds to switch
off the product. Two brief tones will sound.
When the product is no longer being used, the backlight of the display swill
switch off after approx. 15 seconds. After approx. 60 seconds the product
will automatically switch off; this is indicated by two brief tones.