PSBSA 20-Li A1
GB
│
IE
│
NI
│
3
■
Noise emission value:
Noise measurement value determined in accordance
with EN 60745 . The A-rated noise level of the
power tool is typically as follows:
Sound pressure level: L
PA
= 86 .7 dB (A)
Uncertainty K:
K
PA
= 3 dB
Sound power level:
L
WA
= 97 .7 dB (A)
Uncertainty K:
K
WA
= 3 dB
Vibration emission value:
Total vibration values (vector total of three direc-
tions) determined in accordance with EN 60745:
Hammer drilling in concrete:
a
h
,ID
= 9 .875 m/s
2
Drilling in metal:
a
h,D
= 3 .475 m/s
2
Uncertainty K = 1 .5 m/s
2
Screws:
<2 .5 m/s
2
Uncertainty K = 1 .5 m/s
2
Wear hearing protection!
NOTE
►
The vibration level specified in these instruc-
tions has been measured in accordance with
a standardised measuring procedure and
can be used for equipment comparisons . The
specified vibration emission value can also
be used to make an initial exposure estimate .
WARNING!
►
The vibration level will vary according to the
use of the power tool and may sometimes
be higher than the value specified in these
instructions . Regular use of the power tool in
this way may cause the user to underestimate
the vibration . Try to keep the vibration loads
as low as possible . Measures to reduce the
vibration load are, e .g . wearing gloves and
limiting the working time . Wherein all states
of operation must be included (e .g . times
when the power tool is switched off and times
where the power tool is switched on but
running without load) .
General Power Tool
Safety Warnings
WARNING!
►
Read all safety warnings and all instructions .
Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious
injury .
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool .
1 . Work area safety
a)
Keep work area clean and well lit.
Cluttered or dark areas invite accidents .
b)
Do not operate power tools in explosive atmos-
pheres, such as in the presence of flammable
liquids, gases or dust.
Power tools create sparks
which may ignite the dust or fumes .
c)
Keep children and bystanders away while
operating a power tool.
Distractions can cause
you to lose control .
Содержание 291869
Страница 3: ...A...
Страница 4: ...BATTERY COMPATIBLE WITH ALL DEVICES OF THE SERIES PARKSIDE X 20V TEAM 20V max 18V...