Parkside 284796, Перевод оригинальной инструкции

Страница: 6 / 48

6
GB IE NI CY
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
working hours. For this purpose all
parts of the operating cycle have to
be considered (for example, times
when the electric tool is switched
off and times when it is switched on
but running without any load).
Safety instructions
Ensure that the safety instructions are ob-
served when operating the appliance.
Symbols on the appliance
Read the manual.
Wear ear protection.
Wear eye protection.
Wear breathing protection.
Wear hand protection.
Pull out mains plug immediately, if
the mains cable is damaged, entan-
gled or severed.
Always remove the mains plug be-
fore working on the device.
Do not expose the equipment to the
damp.
Electrical appliances must not be
disposed of with the domestic waste.
Protection class II (Double insulation)
Clockwise rotation
Anticlockwise rotation
Impact drilling
Drilling and screwing
Speed adjusting ring
Symbols in the manual
Warning symbols with in-
formation on damage and
injury prevention.
Hazard symbol with infor-
mation on the prevention of
personal injury caused by
electric shock.
Instruction symbols with information
on preventing damage.
Pull out the mains plug.
Help symbols with information on
improving tool handling.