Parkside 113362, Инструкции по эксплуатации и безопасности

Страница: 57 / 75

57 GB/MT
operation / Maintenance and cleaning
Examples of appropriate tool selection Function:
Function Accessory Application Projection
(min–max) mm
Drilling HSS drill
12
Drilling wood 18–25 when us-
ing the smallest
drill the projection
is 10 mm
Milling Milling bits
20
Various tasks, e.g. hollowing out, goug-
ing, shaping, grooving or slotting
18–25
Engraving Engraving
bits
21
Making marks, craft projects
(see Fig. D)
18–25
Polishing, derusting
CAUTION!
Use only the lightest
contact pressure of
the tool on the
workpiece.
Metal brush
16
Derusting
9–15
Polishing wheel
14
Working on various metals and plastics,
in particular noble metals like gold or
silver (see Fig. E)
12–18
Cleaning Plastic brush
19
E.g. cleaning complex plastic housings
or the area around a door lock
9–15
Grinding Grinding
wheels
15
Grinding work on stone, wood; fine
work on hard materials such as ceramic
or alloyed steel (see Figs. F, G)
12–18
Grinding bits
22 10
Cutting and sawing Cutting discs
17
Cutting metal,
plastic or wood
12–18
Be sure not to exceed the maximum diameter of
composite abrasive wheels and grinding cones
and cylinders with 55 mm thread insert, and
the 80 mm maximum diameter of sandpaper
grinding accessories.
Note: The max. permissible mandrel length is
33 mm.
Store accessories inside the original box or oth-
erwise protect the accessories from damage.
Store accessories dry and away from aggres-
sive media.
Tips and tricks
Applying excessive pressure can cause the in-
stalled tool to break and / or damage the work
piece. optimal results can be achieved by ap-
plying the tool to the work piece at a steady
speed range and little pressure.
Hold the device with both hands whilst cutting.
Please note the data and information in the
chart to prevent the spindle end touching the
perforated plate of the grinding tool.
Q
Maintenance and cleaning
The device is maintenance-free.
Clean all the dirt off the drill / grinder. Use a
dry cloth for cleaning.