Parkside 10.8 A1 5 Скачать руководство пользователя страница 38

39 

GB/MT

General safety advice for electrical power tools

tool that can no longer be switched on and off 
is dangerous and must be repaired. 

c)

 

 Pull the mains plug out of the socket 
and / or remove the rechargeable bat-
tery before you make any adjustments 
to the device, change accessories or 
when the device is put away.

 This pre-

caution is intended to prevent the device from 
unintentionally starting.

d)

   

When not in use always ensure that 
electrical power tools are kept out of 
reach of children. Do not let anyone use 
the device if he or she is not familiar 
with it or has not read the instructions 
and advice.

 

Electrical power tools are dan-

gerous when they are used by inexperienced 
people. 

e)

   

Look after the device carefully. Check 
that moving parts are working prop-
erly and move freely. Check for any 
parts that are broken or damaged 
enough to detrimentally affect the 
functioning of the device. Have dam-
aged parts repaired before you use 
the device.

 

Many accidents have their origins 

in poorly maintained electrical power tools.

f)  

Keep cutting tools clean and sharp.

 

Carefully maintained cutting tools with sharp 
cutting edges are less likely to jam and are 
easier to control.

g)  

Use the electrical power tool, accesso-
ries, inserted tools etc. in accordance 
with these instructions and advice, and 
the stipulations drawn up for this par-
ticular type of device. In doing this, take 
into account the working conditions 
and the task in hand.

 

The use of electrical 

power tools for purposes other than those in-
tended can lead to dangerous situations.

5.   Use and handling of the cord-

less electrical power tool

a) 

 Charge a rechargeable battery unit 
using only the charger recommended 
by the manufacturer.

 

Chargers are often  

designed for a particular type of rechargeable 

battery unit. There is the danger of fire if other 
types of rechargeable battery units are used. 

b) 

 Only the rechargeable battery units 
supplied are to be used with an elec-
trical power tool.

 

The use of other recharge-

able battery units may lead to the danger of  
injury or fire. 

c)  

When they are not being used, store 
rechargeable battery units away from 
paperclips, coins, keys. nails, screws 
or other small metal objects that could 
cause the contacts to be bridged.

 

Short-

circuiting the contacts of a rechargeable battery 
unit may result in heat damage or fire.

d)   

Fluids may leak out of rechargeable 
battery units if they are misused. If 
this happens, avoid contact with the 
fluid. If contact occurs, flush the affect-
ed area with water. Seek additional 
medical help if any of the fluid gets 
into your eyes. 

Escaping battery fluid may 

cause skin irritation or burns. 

 Safety advice relating  
to cordless drill drivers

  

Securely support the workpiece. A workpiece 
held in a clamp or vice is kept more securely in 
place than one held by your hand.

WARNING!

 

POISONOUS DUSTS! 

 

 

 

Harmful / noxious dusts generated from your 
work represent a risk to the health of the person 
operating the device and to anyone near the 
work area.

 

   Wear safety glasses and a dust 

mask!

  

Do not drill any material containing 
asbestos. 

Asbestos is a known carcinogen.

  

Hold the electrical power tool firmly. 

High reaction torques may occur momentarily 
during tightening or loosening of screws.

  

If the inserted tool jams, switch off the 
electrical power tool immediately. 

Be 

prepared for high reaction torques as they may 
cause kickback. The inserted tool may jam if 
the electrical power tool is overloaded or is 
held at an angle to the workpiece.

Содержание 10.8 A1 5























































Отзывы: