Errors and omissions excepted (E&OE). Copyright 2016 Parksafe Automotive Limited. All Rights Reserved .
G Sensor Calibration Cont..
Please wait for this screen to calibrate
This will take only a few seconds
Choose Card
This camera comes with a 8GB onboard memory , but if you
would like to upgrade the card you can purchase a 32GB card
class 6 and install into the SD card slot as shown in picture 4
on page 2.
Then choose the OUTTER CARD in the menu.
Please see page 3 picture 4 in “quick guide”
GPS
To enable the GPS function on the camera the camera GPS
needs to be set to OPEN, if in the CLOSE position the GPS will
not work.
Please see page 3 picture 1 in the “quick guide”
Format
This function formats (deletes) all videos and photos on the
internal and external memory. Please remember to back up
your data before using this function.
Please note if the G-sensor is ON, the card will contain locked
files, over time these files will fill the card, and stop the
camera recording.
You must format you SD card every 4-5 weeks.
Firmware
This function gives information about the firmware version on
the camera
