Errors and omissions excepted (E&OE). Copyright 2016 Parksafe Automotive Limited. All Rights Reserved .
Date Time Display
This options stamps the data into the video file.
So when playing the video file back the date and time will be
displayed
Loop Setting
The Loop setting feature allows the device to recycle the
memory card.
We recommend a 5 minute loop setting, every 5 minutes the
camera will make a new video file, when the card is full the
camera will automatically delete the oldest video and recycle
the recordings.
Please note in the OFF position when the card is full the
camera files will have to be deleted manually
Sensor Flip
This allows the camera to be installed 180 degrees so the
screen and camera are showing the correct way.
This function is only used in certain installs
Motion Detect
This function is used in a CCTV install, where the camera is in
sleep mode until the lens detects movement, when this
happens the camera wakes and starts recording.
This function is NOT used if the camera is being used as a
drive accident camera
Stamp
This function allows more data to be inputted into the video
file.
We recommend GPS DATA so the speed and gps data is
stamped into the video file along with the time and date
