Parksafe Automotive SW004SSD Скачать руководство пользователя страница 72

Страница: 72 / 82

Alarm Out-Output2

: Set it ON, then 12V level output would come from the alarm wire of Output 2

Display

: A full screen of one channel will display when this channel is triggered.

Cursor

: See the picture below.

①

Camera name of the alarm-triggered channel.

②

Touch this button to turn on/off cursor.

③

Line selecting: There are five lines to be selected. Line U (up), Line D (down), Line L (left), Line R

(right) and ALL. The button turns green if selected. You can use remote control to operate.

④

There are four directions to adjust the shape of the cursor, Up, Down, Left and Right.

If Line U (the green one) or Line D (the red one) is selected, the selected line can be moved with

these directions.

If Line L or Line R is selected, the top point of the selected line can be moved to left or right with

Direction Up and Direction Down, and the bottom point of the selected line can be moved to left or

right with Direction Left and Direction Right.

⑤

Lines of cursor. The selected one will be thickened for three times. The two lines in the middle will

not be processed.

⑥

Touch OK to save the settings and exit.

Cancel to exit without saving any settings.

Priority

: See the picture below.

Содержание SW004SSD



















































































Результаты поиска

Содержание SW004SSD

Отзывы:

Похожие инструкции для SW004SSD

Бренды по названию

Популярные бренды

Parksafe Automotive SW004SSD, Руководство по эксплуатации

Результаты поиска

Содержание SW004SSD

Отзывы:

Похожие инструкции для SW004SSD

Бренды по названию

Популярные бренды