Parksafe Automotive SW004SSD Скачать руководство пользователя

Страница: 51 / 82

9.6 Menu on

Set the menu display duration.

Menu on:

Duration can be set to 30s, 60s, 120s and Always. When it is set to 30s, 60s, 120s, it means that the

menu will disappear if there is no operation in 30s, 60s or 120s. When it is set to Always, the menu

will always be there. Please be noted that the recording will stop when menu is on. It is not

suggested to set the duration to Always in order not to affect the recording

Menu lock:

When it is On, permission is required to enter the menu;

When is it Off, no permission is required to enter the menu;

Username and password are required if to change the status of the menu lock.

9.7 Speed

Speed setting:

The data source of overspeed comes from GPS. Speed unit is optional: Km/h or

Mile/h.

Overspeed threshold can be set by user. Speed refers to the current speed of the

vehicle. If the Speed exceeds the vaule of the Overspeed, the overspeed alarm

recording will be triggered.

The alarm switch is to set the overspeed alarm recording ON and OFF. If it is ON, the

Содержание SW004SSD



















































































Результаты поиска

Содержание SW004SSD

Отзывы:

Похожие инструкции для SW004SSD

Бренды по названию

Популярные бренды

Parksafe Automotive SW004SSD, Руководство по эксплуатации

Результаты поиска

Содержание SW004SSD

Отзывы:

Похожие инструкции для SW004SSD

Бренды по названию

Популярные бренды