JINCHI05 RevD 21/05/14
A
PPLIANCE
D
IMENSIONS
Removing Internal Components
All internal components must be removed prior
to fitting the stove. This will make handling the
stove easier; allow access to fixings and the flue
outlet; as well as protect the internal
components from damage during the installation
process.
1.
Open the door(s) and remove the ashpan.
2.
Remove the fuel retainer by lifting the right-
hand side until it will clear the opening and
remove.
3.
Remove the catch bar / front plate by lifting
the right-hand side until it will clear the
opening and remove.
4.
Remove the grate bars by lifting them away
from the cam bar and pulling forward out of
the rear grate support. The singular bars
should be removed first, noting their
positions (low or high), leaving the two static
triangular bars to last.
N.B. When re-installing, the side bars need
to be installed first, followed by the singular
bars. The final two grate bars should be
installed at the same time for ease of fit.
