Parkray CONSORT SLIMLINE 5 Скачать руководство пользователя страница 3

Страница: 3 / 18

JINCNS05 RevF 27/04/12

General Guidance

It is important that your stove is correctly

installed as Parkray Stoves cannot accept

responsibility for any fault arising through

incorrect use or installation.

These instructions cover the basic principles to

ensure satisfactory installation of the stove,

although detail may need slight modification to

suit particular local site conditions.

The installation must comply with current

Building Regulations, national and European

standards, Local Authority byelaws and other

specifications or regulations as they affect the

installation of the stove.

The Building Regulations requirements may also

met

adopting

the

relevant

recommendations in the current issues of

British Standards BS 8303 and BS EN 15287-1.

Competent Persons Scheme

Parkray Stoves recommend that this stove is

installed by a member of an accredited

competent persons scheme e.g. HETAS.

If the installer is not a member of a competent

persons scheme, it is a legal requirement to

notify your local building control body in

advance of any work starting.

CO Alarms

Building regulations require that whenever a

new or replacement fixed solid fuel or

wood/biomass appliance is installed in a

dwelling, a carbon monoxide alarm must be

fitted in the same room as the appliance.

Further guidance on the installation of the

carbon monoxide alarm is available in BS EN

50292:2002 and from the alarm manufacturer’s

instructions.

Provision of an alarm must not be considered a

substitute for either installing the appliance

correctly or ensuring regular servicing and

maintenance of the appliance and chimney

system.

Health and Safety Precautions

Special care must be taken when installing the

stove such that the requirements of the Health

and Safety at Work Act are met.

Handling

Adequate facilities must be available for

loading, unloading and site handling.

Fire Cement

Some types of fire cement are caustic and

should not be allowed to come into contact

with the skin. In case of contact, wash

immediately with plenty of water.

Asbestos

This stove contains no asbestos. If there is a

possibility of disturbing any asbestos in the

course of installation then please seek specialist

guidance and use appropriate protective

equipment.

Содержание CONSORT SLIMLINE 5



















Результаты поиска

Содержание CONSORT SLIMLINE 5

Отзывы:

Похожие инструкции для CONSORT SLIMLINE 5

Бренды по названию

Популярные бренды

Parkray CONSORT SLIMLINE 5, Инструкция по установке и эксплуатации

Результаты поиска

Содержание CONSORT SLIMLINE 5

Отзывы:

Похожие инструкции для CONSORT SLIMLINE 5

Бренды по названию

Популярные бренды