10 | Page
www.parklio.com | [email protected] | +385977247276
Hercegovacka 78, 21 000 Split | Commercial Court in Split | MBS: 060323069 | Raiffeisen Bank,
Zagreb, Petrinjska 59 | IBAN: HR7724840081107194017 | VAT: HR60755958894
PARKLIO™ CHAIN USER MANUAL
7.INSTALLATION
All measures are expressed in millimeters unless otherwise indicated.
1. Control the stability and solidity of the zone where the columns are
going to be fixed.
2. Use an omni-polar interrupter with contact distance of at least 3mm.
3. The connection to the power supply must be separated than the
connections to the security and commanding devices
1. Screw in for 1,5 - 2,0 cm the 4 screws M10x70 in dotation to the base.
2. Place the base on the previously prepared base of cement (Fig.3)
3. The upper part of the base should be clean and perfectly horizontal.
4. Pass the plastic tubes of the cables through the central opening on the
base and check again the stability of the base.
5. Unscrew the 8 screws [10] take off the frontal [8] and the rear cover [9] of
the column (Fig. 4 )
6. Place now the column structure on the base.
7. Fix now the column to the base with the 4 washers [5] and 4 nuts [4].
8. Fix the frontal covers [8] of both columns with 4 screws [10].
9. Now you can fix the chain to the apposite holes on both columns
respecting the level X in the middle of the chain barrier indicated at the
table on page 1 (Fig. 5 )
7.1. PreliminaryControl
7.2. InstallationoftheColumn(Fig.1,Fig.2,Fig.4)
