Parklander PZT-52C, Руководство оператора

Страница: 24 / 42

- 20 -
Position the mower deck in the transport (all
the way up) setting with the latch hooked
and the height adjustment pin in the 5 inch
cutting height hole.
6.9.2
6.9.2 6.9.2
6.9.2 Lift the front of the machine, using
the front cross member of the deck carrier
frame, and support the machine using jack
stands or other equivalent safety blocks.
DO DO DO DO
NOT NOT NOT NOT rely solely on mechanical or hydraulic
jacks or lifts for support. Always use
adequate wheel chocks on tires remaining
on the ground.
6.9.3
6.9.3 6.9.3
6.9.3
Use a long flat bar to clean under the
deck, to avoid positioning yourself under
the machine.
6.9.4 6.9.4 6.9.4 6.9.4 Clean out all grass and debris
build-up from the underside of the deck,
around
blade spindles and the deck
discharge chute.
6.10.
6.10. 6.10.
6.10. Blade
Blade Blade
Blade Inspection
Inspection Inspection
Inspection
WARNING WARNING WARNING WARNING
DO DO DO DO NOT NOT NOT NOT handle handle handle handle mower mower mower mower blades blades blades blades with with with with bare bare bare bare
hands.
hands. hands.
hands. Use
Use Use
Use heavy
heavy heavy
heavy leather
leather leather
leather gloves
gloves gloves
gloves or
or or
or wrap
wrap wrap
wrap
blade
blade blade
blade with
with with
with protective
protective protective
protective material
material material
material and
and and
and block
block block
block
securely
securely
securely securely when
when
when when removing
removing
removing removing blades.
blades.
blades. blades. Careless
Careless
Careless Careless
or or or or improper improper improper improper handling handling handling handling may may may may result result result result in in in in
serious serious serious serious injury. injury. injury. injury.
Inspect blades before each use to determine
that they are mounted securely and are in
good condition. Replace any blade that is
bent, excessively nicked, worn, or has any
other damage. Small nicks can be ground
out when sharpening.
6.11. 6.11. 6.11. 6.11. Blade Blade Blade Blade Removal Removal Removal Removal
Remove bolt (A), which has right hand
threads (Refer to Figure 12),Remove lock
flat washer (B), fiber washer (C), blade.
Lift Of Blade
Figure 12
A
B
C
6.12. 6.12. 6.12. 6.12. Blade Blade Blade Blade Sharpening Sharpening Sharpening Sharpening
CAUTION
CAUTION CAUTION
CAUTION
Always Always Always Always wear wear wear wear gloves gloves gloves gloves when when when when handling handling handling handling the the the the
mower mower mower mower blades. blades. blades. blades. Always Always Always Always wear wear wear wear safety safety safety safety eye eye eye eye
protection
protection
protection protection when
when
when when grinding
grinding
grinding grinding
6.12.1
6.12.1 6.12.1
6.12.1 Sharpen the mower blades with
grinder, hand file, or electric blade
sharpener.
6.12.2 6.12.2 6.12.2 6.12.2 Sharpen the mower blade by
removing an equal amount of material from
each end of the mower blade.
6.12.3
6.12.3
6.12.3 6.12.3 Keep the original bevel (A, Figure
13) when grinding.
DO
DO DO
DO NOT
NOT NOT
NOT
change the
mower blade bevel.
B
Figure 13
A
6.12.4 6.12.4 6.12.4 6.12.4 The mower blade should have a
maximum 1/64” (0.40mm) cutting edge
(B,Figure 11) or less.
Balance Balance Balance Balance the the the the mower mower mower mower blades blades blades blades before before before before
installing.
installing. installing.
installing.
6.13.
6.13. 6.13.
6.13. Balancing
Balancing Balancing
Balancing the
the the
the Mower
Mower Mower
Mower Blades
Blades Blades
Blades
All manuals and user guides at all-guides.com