Cleaning The Door Glass
Installing the cooker
Location
33
S I G 5 0 5 S S E
Installation
For your safety
This cooker must be installed and serviced by a competent
person as stated in the Gas Safety (Installation & Use)
regulations current editions and the IEE Wiring Regulations.
It is important that the cooker is suitable for your gas
supply. Your installer should check the data badge.
Make sure that a stability bracket is fitted.
For your safety
The use of a gas cooking appliance results in the production
of heat and moisture in the room in which it is installed.
Ensure that the kitchen is well ventilated: keep natural
ventilation holes open or install a mechanical ventilation
device (mechanical extractor hood).
Prolonged intensive use of the appliance may call for
additional ventilation, for example opening of a window, or
more effective ventilation, for example increasing the level of
mechanical ventilation where present.
For further details see page 42.
To prevent damaging or weakening the door glass panels avoid
the use of the following:
Household detergents and bleaches
Impregnated pads unsuitable for non-stick saucepans
Brillo/Ajax pads or steel wool pads
Chemical oven pads or aerosols
Rust removers
Bath/Sink stain removers
If the door glass panel becomes chipped or has deep scratches
the glass will be weakened and must be replaced to prevent the
possibility of the panel shattering. Please contact your local
Service Centre who will be pleased to advise further.
Содержание SIG 505 SSE
Страница 1: ...Owners handbook and Installation Instructions Gas cooker SIG 505 SSE...
Страница 49: ...49...
Страница 50: ...50 SIG 505 SSE 311494803...