Parkinson Cowan Ovation 60 GLa, Руководство пользователя

Страница: 40 / 48

LOCATION OF APPLIANCE
This is a type X appliance which means it is freestanding and can be fitted with cabinets on one or both
sides. This appliance must not be installed in a bed-sitting room of volume less than 20m³ or in a bathroom
or shower room. It is essential that the appliance is positioned as stated below (see Fig. 1a)) i.e. shelves,
wall cabinets and cooker hoods must be fitted a minimum of 787mm directly above the top of hotplate and
400mm above the hotplate when fitted in line with the outside of the appliance. If the units are intended to
be fitted adjacent to the appliance but less than 400mm above the hotplate, then a minimum space of
100mm must be maintained between the sides of the unit and the appliance (see Fig.1b). Curtains must
not be fitted immediately behind the appliance or within150mm of the sides of the hotplate. If fitted next to
or between two base units a minimum space of 1mm must be left between each unit and the sides of the
appliance. The levelling feet fitted to the appliance will achieve a nominal height to hotplate trims of 900mm
- 2mm +20mm. If the appliance needs to be higher that 920mm, then an optional height adjustment kit is
available which will raise the appliance to a nominal height of 945mm (wheels kit no. 359079800 G.C. No
074 498).
Fig.1a All dimensions in mm Fig.1b
4
less
than
400
100
400
787
787