Parkinson Cowan CSG 427, Инструкции по эксплуатации и монтажу

Страница: 25 / 48

Clean the hotplate top using a mild abrasive such as 'Cif'. Take care not to
damage the spark electrodes. If the spark electrodes are damaged the
burners will not light.
You can remove the pan supports, burner caps and burner crowns to
clean them. Again take care not to damage the spark electrodes.
If any food spills do occur during cooking you can place the pan on
another burner to finish cooking. Then you can remove the dirty parts and
clean them before the spill 'burns on'.
You can wash the removable parts in very hot soapy
water. You may use mild abrasives. Make sure that
the electrode and the hole and slots in the crown are
not blocked with food or cleaning materials.
Clean the burner crowns by soaking them in very hot soapy
water. You can remove any stubborn stains by scouring with a soap
filled pad such as 'Brillo'. If you look after the burner crowns in this way
they will stay reasonably clean. However the surface will dull with time.
Aluminium based saucepans can leave shiny metal marks on the pan
supports. Clean the pan supports regularly to remove the marks using a
mild abrasive like 'Cif' with a soft scourer. For more stubborn marks you
can use a soap filled pad such as 'Brillo'. After cleaning the appliance
parts, dry them thoroughly before you put them back.
When replacing hotplate burner parts
1. Crown to body (Do not try to force the
crown on to the body).
Make sure that the hole in the crown is
centrally over the electrode. Check that
the two longer location pegs sit in the
slots in the body. When the crown is in
the position let it fall freely on to the body.
Check that the crown can be moved
slightly from side to side.
2. Cap to crown.
Place cap centrally on the top of crown
(enamel side up). Move sideways and
front to back to check the cap is properly
fitted.
3. Check for ignition
If a burner will not light then you need to
check the crown and cap positions.
C S G 4 2 7
25
Care and cleaning