in
Parking and access control equipment manufactured in the UK
PF9700 Automated Hinge Gate
1.Before attempting the steps outlined below please obey common sense and make sure that you have
closed the passage the Gate will inhibit provided a diversion and informed site inc pedestrians.
2.Follow the manual release guide in this manual and make sure the Gate moves un-hindered by inserting
the winding handle and turning to make the Gate open and then close.
3.If the above step is ok then proceed to close the Gate using the manual method and then power on
using the isolator switch as shown (if fitted).
4.Now read the steps below to move the gate automatically.
There are many options to operate the Gate and is dependant upon which type of access control you have connected.
However there is a standard way to operate the Gate by using the key switch (if fitted) and the arrows on the front of
the panel Instructions are assisted by pictures below.
1. Picture shown below is the key switch & emergency stop button unit (if fitted) which is located on the outside of
the Gate cabinet, also shown below is the key switch keys.
2. To move the Gate using the arrow keys on the panel first make sure the screen says “
-e.o-
” (end position open) or
“
-e.c-
”(end position closed) if it does not follow the troubleshooting guide on page 9 when the screen does say “
-e.o-
”
or “
-e.c-
” follow below.
3. To make the Gate move to “open” press the up arrow.
4. To make the Gate move to “close” press the down arrow.
Please note that the step 4 manoeuvre will not work if there is something in the way of photo-cells a presence on
the loops (if fitted).
1.
2.
3.
4.
Key switch
keys
This key switch is mounted on
the side of the Gate
Key switch
Auto
Open
IDEC
IDEC
Drawing showing the “UP”
arrow being pressed
Drawing showing the “DOWN”
arrow being pressed
STOP
UP ARROW
STOP BUTTON
DOWN ARROW
STOP
STOP
-e.o-
-e.c-
1.
2.
3.
4.
When the Key is inserted fully
into the centre hole turn
clockwise to open and anti-
clockwise to close. After this
you must remove the manual
release handle.
Off
On
If an isolator is fitted
turn the knob
clockwise to power
on the Gate.
ROAD
CLOSED
(not fitted as standard optional)
First Operation Manouvres
8
