background image

 

 

11

 
Using and Recharging the Auxiliary battery Pack  
 
 
 

A Rechargeable Auxiliary Battery Pack is available to connect with the Tracking 
Ring Power Pack for extra long use.  
 
When attached to the Tracking Ring Power Pack, the Auxiliary Battery Pack 
overrides the built-in battery.  
 
If more than 4 hours of use is required, connect the Auxiliary Battery Pack to the 
Tracking Ring Power Pack.  

 
To recharge the Auxiliary Battery Pack: 
 

1. Turn 

OFF 

the Tracking Ring Power Pack. 

 
2.  Set the switch on the front of the Battery Charger 

 to 

AUXILIARY BATTERY PACK

 

3.  Plug the Battery Charger into an electrical 

outlet and connect the Auxiliary  
Battery Pack to the charger. 

 

To get the maximum usage from the batteries, use 
the built-in battery first until the 

Battery LOW 

LED illuminates, 

then attach the Auxiliary Battery Pack. 
 
The Battery Charger takes 4 – 6 hours to recharge the Auxiliary Battery 
Pack. 
 

As a matter of regular practice, when you are done with a session, 
you should plug the tracking power pack into the charger. Be sure 
that the charger is plugged into the wall outlet and that the switch on 
the front of the charger is in the proper position. 
 
When the tracking power pack is fully charged (indicated by the light 
on the charger flashing fast), you should then charge the auxiliary 
power pack. Again, be sure to move the switch on the front of the 
charger to the proper position. 

Содержание CameraMan System II












Отзывы: