background image

 

 

10

Recharging the Power Packs 

 

 
 

 
 
 
 
 

The Tracking Ring Power Pack comes with a built-in 4-hour Rechargeable Battery. 
When the battery is running low, the 

Battery LOW 

LED on the top of the Tracking 

Ring Power Pack 

will glow red

. At this time, the Tracking Ring Power Pack should 

be recharged or the Auxiliary Battery Pack should be 
attached to the Tracking Ring Power Pack. 

 
 
 
 
 
 
 
  
 

 

 

 
 
 
 

To recharge the battery: 
 

1. Turn 

OFF 

the Tracking Ring Power Pack. 

 
2. Set the switch on the front of the battery     

.

charger to 

TRACKING POWER PACK

 
3. Plug the Battery Charger into an electrical   

outlet and connect the Power Pack to the  

charger, as shown in the diagram to the right.

 

The Battery Charger takes 2 to 3 hours to 
recharge the Tracking Ring Power Pack. 
 

Top view of Power Pack 
showing orange LOW LED 
and green Power On LED. 

 
 
 
 
 
 
 
 
 
 
 

The LED on the Battery Charger indicates when the 
battery is fully-charged. 
 
If a battery is very low, then the LED on the charger 
flashes slowly.  
 
While the battery is charging, the LED on the charger 
remains solid.  
 
When the battery is fully-charged, 
the LED on the charger flashes faster. 

 
 
 
 

Содержание CameraMan System II












Отзывы: