ParkerBrand PGHT-2600, Руководство пользователя

Страница: 6 / 17

10 11
CHECK BEFORE USE
IMPORTANT! - Before beginning work, look around carefully to get a
feel for the shape of the land, or plants to be trimmed, and whether or
not there is any obstacle which might get in the way while working, and
remove any obstacle which can be cleared away.
•
The area within a perimeter of fifty meters of the person using the
hedge-trimmer should be considered a hazardous area into which
no one should enter while the hedge-trimmer is in use. When work
is to be performed simultaneously by two or more persons, always
check the presence and location of others so as to maintain a
distance between each person sufficient to ensure safety.
•
Before starting, please inspect the machine, make sure that the fuel
tank, blade, and machine are in good condition. Be especially
careful to check that there is nothing wrong with the blades or with
the joints by which the blades are attached to the hedge-trimmer.
•
When the blades wear and the clutch assembly is worn or
damaged, please stop and replace worn parts.
•
Make sure that the handle and protective cover are in good
condition.
STARTING THE ENGINE
•
While starting the engine make sure the area around you is safe
to do so.
•
The machine has a centrifugal clutch, the blades should not
move at idle. Only when the speed is up to a certain value when
the throttle is engaged will the blade begin to move
WARNING! - Do not set the throttle at high speed when starting.
OPERATION
•
Keep your hand tight on the handle, and keep in the correct
position.
•
If the blade starts to click, stop quickly, restart machine after
cleaning the blades.
•
Do not touch the spark plug while the engine is running.
CAUTION! - After using your hedge trimmer, never touch the
exhaust, spark plug and other metal parts (these parts will get hot!)
to prevent injury.
FOR SAFE OPERATION
FOR SAFE OPERATION
MAINTAIN YOUR UNIT PROPERLY
•
Have all maintenance other than the recommended procedures
described in the instruction manual performed by an authorized
service dealer.
•
Disconnect spark plug before performing maintenance except for
carburettor adjustments.
•
Use only recommended ParkerBrand replacement parts; use of any
other parts may void your warranty and cause damage to your unit.
•
Empty fuel tank before storing the unit. Use up fuel left in carburet-
tor by starting engine and letting it run until it stops.
•
Do not use any accessory or attachment other than those
recommended by manufacturer for use with your unit.
•
Do not store the unit or fuel in a closed area where fuel vapours can
reach sparks or an open flame from hot water heaters, electric
motors or switches, furnaces, etc.
•
Store in a dry area out of reach of children. Secure the machine
during transport.
WARNING: - It is very dangerous to change or modify the machine
yourself. Please understand that you will not be entitled to any
protection if your machine has been changed or modified in anyway
which is not addressed in your Owners Manual.
SAFETY NOTICE
Exposure to vibrations through prolonged use of petrol powered hand
tools could cause blood vessel or nerve damage in the fingers, hands,
and joints of people prone to circulation disorders or abnormal swelling.
Prolonged use in cold weather has been linked to blood vessel damage
in other-wise healthy people. If symptoms occur such as numbness,
pain, loss of strength, change in skin colour or texture, or loss of feeling
in the fingers, hands, or joints, discontinue the use of this tool and seek
medical attention. An anti-vibration system does not guarantee the
avoidance of these problems. Users who operate power tools on a
continual and regular basis must monitor closely their physical
condition and the condition of this tool.
i
i
i
i
i