16
17
ASSEMBLY
Ensure the brake is disengaged by pulling the handle
firmly back.
You may feel a strong resistance but this is normal for
first time use. When the two handles are touching the
brake is disengaged.
Remove the brake cover assembly cover by removing
the two (2) nuts with the tool provided.
1
CHECK THE BRAKE
2
REMOVE THE CHAIN COVER
3
ASSEMBLY
Attach the bumper spike (also referred to as the chain
catcher) using the two (2) socket cap screws and allen
key provided.
Wrap the chain around the sprocket (located behind
the clutch). Check your chain is pointing in the correct
direction.
Install the bar and slide fully towards the sprocket and
loosely wrap the chain around the bar.
4
ATTACH THE SPIKE
INSTALL THE CHAIN
5
INSTALL THE GUIDE BAR
Installation and use of the spiked
bumper makes it easy to control the
chainsaw and lessens kickback. The
bumper spike acts as a pivot between
the engine body and guide bar.
i
Always adjust the guide bar with the
engine stopped.
i
