22
23
STARTING THE ENGINE
6
TENSION THE RECOIL
Place the chainsaw on the ground and place your right
foot inside the chainsaw handle to keep it firmly against
the ground. Using your left hand press down on the top
handle and using your right hand pull the recoil starter
handle outwards until tension is felt.
Set the on/off switch to position “I”.
The “I” should be pressed downwards. The “O” will be
in the outward position.
5
SWITCH ON
7
START THE ENGINE (COLD)
1. Make sure that the choke is
ON
2. Pull the recoil starter
TWICE
in quick succession.
3. After two pulls turn the choke
OFF
and continue to
pull starter until engine starts.
ENGINE MAY NOT START AFTER FIRST TWO PULLS
BUT STILL TURN OFF THE CHOKE AND CARRY ON.
A
STARTING THE ENGINE
7
START THE ENGINE (WARM)
1. Make sure that the choke is
OFF
2. Pull the recoil starter in quick succession until
the engine starts.
B
When operating your chainsaw hold
the rear handle with your right hand,
and the front handle with your left
hand.
