Parker V300, Информационный бюллетень о продукции

Страница: 16 / 36

Bulletin 76-00 B
16
Remote Communications Setup Instructions - Option 1
Steps Setup Instructions Display Notes
14
Click 'View History' on the Main
To update any parameter, select
'Purge setting'
To set any parameter, press 'Apply'
15
To Initiate a manual purge, select
'INIT' on the Main Screen
16
The following screen will appear.
Select the purge point in question
and press 'Initiate Point' to start.
17
To terminate a purge, select ‘TERM’
on the Main Screen
18
The following screen will appear.
Select ‘Terminate Point’ to
terminate the current purge point
and cycle to the next. Select
‘Terminate Cycle’ to end purging
completely.
19
Click 'View History' on the Main
Page to view the last 12 weeks of
history.
20
The following screen will appear.
Here, select any date in time and
press ‘read’ to get a history for the
week in question.
If current week is selected, point by point
observations can be viewed
21
The screen will show the number
of vents and total vent time at each
purge point for a given week.
Remote Communications Setup Instructions - Option 1 Continued