Bulletin 4480-TH1E-5/UK
Hose Fitting Insertion device TH1E-5
Selection of the place of installation, intermediate storage
3.4 Rules to observe
Make sure not to crush or damage the hose in the clamping unit.
Pay attention so as not to press on the swivel nut of the fitting with the inser-
tion mandrel, the insertion cone or the insertion disk and not to damage its
sealing face or seal.
4
Selection of the place of installation
The machine must be operated and stored in a closed building which
adequately protects the machine from atmospheric influences, temperature
fluctuations and humidity.
The machine has not been designed for use in potentially explosive
atmospheres.
Furthermore, the place of installation should be provided with appropriate
lighting and there should be enough room to allow safe working.
The machine requires a stable workbench as a base.
Please ensure that the workplace is ergonomically designed. Observe the
statutory provisions including but not limited to workplace
design, such as the health and safety at work act, insurers’ requirements etc.
For information about ambient conditions for operation and storage and
energy supply, please refer to chapter “Specifications”.
4.1 Structural requirements
Permanent floor load
about 0,07 kg / mm
2
Floor bearing capacity
2500 kg / m
2
min.
Floor quality
concrete grade B25
to DIN 1045
Evenness
waviness of max. 5 mm / m
Slope
max. 5 mm / m
Table
Floor quality
16
