Bulletin 4480-TH1E-5/UK
Hose Fitting Insertion device TH1E-5
Operation of the machine
3.2 Insertion of straight fittings
X
X
Place the insertion mandrel or the insertion cone into the retainer to
insert straight fittings.
X
X
Open the clamping unit, place the hose into it and fix the hose with
the clamping crank.
X
X
The end of the hose must protrude from the clamping unit far enough to
the right to ensure that the nipple can be pushed into the hose up to its
full insertion depth.
X
X
Push the fitting a bit into the hose end with your hand.
X
X
Using the hand lever, now move the insertion unit with the insertion
mandrel or alternatively with the insertion cone to the left towards
the hose.
X
X
Make sure that the nipple enters the hose end precisely in its centre
and use the hand lever to push in the fitting up to its full insertion depth.
X
X
Now move the insertion unit back to the right, open the clamping unit
and remove the assembled hose.
Insertion of a straight
fitting with the
insertion cone
14
