Parker SciCon II, Инструкции по установке, эксплуатации и обслуживанию

Страница: 13 / 25

13
Part A: SciCon II Hardware Overview
The SciCon II
consists of two major components, the SciCon II Conductivity Monitor, with its power supply,
and the Single-use SciCon II Sensor, with its cable.
The Monitor is a small desktop package with a backlit display and seven buttons for easy interface and menu
selections. It displays conductivity and temperature in real time in both digital and analog format. The
monitor’s output is also available in digital and analog formats, RS-232 and 4-20 mA. It comes with a small
100-240 VAC wall adapter as a power supply.
The single-use SciCon II Sensors utilize four gold plated electrodes in a polysulfone sensor body available in
five sizes: Luer, 3/8” or 1/2" hose barb, 3/4" and 1” “Ladish” Sanitary TC connections.
For accurate measurements it is important that the sensors, solution and environment are allowed to
equilibrate. If not done, the measurements will drift as the equilibration occurs during the run.
All are pre-calibrated at the factory and retain the calibration data on a small chip embedded in the sensor
body. The following information is retained and is accessed upon connection to the sensor:

ID number (Contains Size, Index, Unique Identifier, and Calibration date)

Calibration Factor

Temperature Offset