31
Gateway Connections (Pinout)
4.1.3.
CANBUS Module Block Diagram
When utilizing the PVSG-IQAN gateway with an IQAN based control system, it is
very important to connect the diagnostic bus of the gateway to the diagnostic bus
of the IQAN Master Controller. See Figure 15.
Figure 16. Block diagram of wiring PVSG-IQAN Gateway
IQAN Master
Controller
IQAN Master
Controller
Diagnostics Bus-
CAN1/CANB
Diagnostics Bus-
CAN0/CANA
PVSG -IQAN
Gateway
Diagnostics Bus-
(configurable)
Other CAN Bus-
Configurable
IQAN Master
Controller
(Headmaster)
I/O Modules
Transmission
Engine
Diagnostics CANBUS must be
connected between master module
and gateway to use - IQAN telematics
signals
Содержание PVSG-IQAN-C2E1M2W1U1
