9
Parker Hannifin Corporation
|
Pump & Motor Division
|
Kings Mountain, NC
WARNING:
This product can expose you to chemicals including lead or DEHP which are known to the state of California to cause cancer,
birth defects, and other reproductive harm. www.p65warnings.ca.gov
Catalog HY13-PMD300-SM/US
PGP/PGM 300 Series
Gear Pumps & Motors Service Manual
Disassembly Instructions
Disassembly Instructions
8)
For multiple assemblies only:
Remove the thrust plate from the bearing carrier.
Examine and replace if necessary.
9)
Lift or pry off the section gear housing. If prying
is
necessary, take care not to damage machined
surfaces (
Fig. 8
). Examine and replace if necessary
(See
pages 19-20
).
Figure 8
10)
Remove section seal and examine for damage.
Insert seal back into the bottom of the gear housing
for reassembly (
Fig. 9
)
Figure 9
11)
Inspect gear housing for damage/cutout at the gear
bore (
Fig. 10
). See
pages 19-20
for wear guide.
Example of excessive cutout on gear housing,
circled in yellow (
Fig. 11
).
Figure 10
Figure 11
