Parker PGBC-5200, Руководство пользователя, Страница: 13 / 31

24 25
INSTALLING THE 3 TOOTH BLADE
Install washer “A” as illustrated above. Align
the hole in the washer with the hole in the
spool collar. This is to help you lock the hub
with an allen key later on in the process.
Place the three tooth blade so the centre
hole sits on the protrusion on washer “A”.
It is important that the blade sits correctly
on washer “A” and not in an off-centered
position which can cause excessive
vibration and premature damage to the
lower shaft.
INSTALLING THE 3 TOOTH BLADE
Install washer “B” as illustrated. Washer "B"
sits on top of the three toothed blade.
NOTE: Please be aware that Washer "A", "B", "C" and the Hub Nut may come pre-installed on the hub of the machine.
i
NOTE: The hub is reverse threaded so to tighten the nut you will have to turn it in an anti-clockwise diretion to
ensure that it is secured in place along with the chosen cutting attachment. To loosen the nut use the allen key to
lock the hub first then the wrench provided and turn it in a clockwise direction.
1
INSTALL WASHER 'A'
2
ATTACH 3 TOOTH BLADE
3
INSTALL WASHER 'B'
Install washer “C” as illustrated above.
Washer "C" sits on top of washer "B".
Install the hub nut as illustrated above to
secure the blade to the shaft.
The hub is reverse threaded so turn in an
anti-clockwise direction to tighten.
Place the allen key through the locating
hole of the collar, through the hole of
washer "A" and into the hub.
Tighten the nut using the wrench provided,
turning anti-clockwise until secured tightly.
4
INSTALL WASHER 'C'
5
INSTALL HUB NUT
6
TIGHTEN HUB NUT
i