Parker PCH1 T P Series, Руководство пользователя

Страница: 41 / 107

PCH Portal Function
41
4.3.3 IO-Link Config Port X
This start-up data is available with IO-Link Modules configured at Pin B slots. The parameters available for
configuration are described in below table.
IO-Link Config Port X
S. No. Configuration Parameter
Bits
Description
7 6 5 4 3 2 1 0
B3 B2 B1 B0 B3 B2 B1 B0
1 IO-Link Configuration Base Time Cycle Time
This parameter can be used to influence the IO-Link Communication speed. Calculated using the multiplier and the time
base, the IO-Link Cycle time can be increased.
The time base is described in Table B3. The multiplier is entered in decimal form from 0 to 63.
Bit Description
7 6 5 4 3 2 1 0
Time
base
Multiplier
Bit 0 to 5: Multiplier
These bits contain a 6-bit multiplier for the calculation
of Master Cycle Time or Minimum Cycle Time.
Permissible values for the multiplier are 0 to 63.
Bit 6 to 7: Time Base
These bits specify the time base for the calculation of
Master Cycle Time or Minimum Cycle Time.
Possible values of Master Cycle Time and Minimum Cycle Time:
Time base encoding Time base value Calculation Cycle time
00 0.1 ms Multiplier x time base 0.4 ms to 6.3 ms
01 0.4 ms 6.4 ms + multiplier x time base 6.4 ms to 31.6 ms
10 1.6 ms 32.0 ms + multiplier x time base 32.0 ms to 132.8 ms
11 RESERVED
NOTE : The value 0.4 results from the minimum possible transmission time.