PC9/P9 Chassis Fan Replacement
2
CTC Parker Automation
Figure 1: Opening the Backshell
5. Swing the backshell away from the faceplate.
6. If you have a PC9, detach the two cables connecting the faceplate
assembly and backshell, as shown in Figure 2. Then go to step 8.
Figure 2: Disconnecting PC9 Cables
a.
Detach the monitor (ribbon) cable from its connection at
the center of the monitor frame (push back the locking
clamps from either side of the monitor).
b. If your system has a touchscreen, detach the touchscreen
cable from its extender in the maintenance compartment.
Remove these
screws
Detach the monitor
cable here
Detach the
MAINTENANCE
COMPARTMENT
touchscreen
cable here
