Parker PAC-96-24, Руководство пользователя

Страница: 18 / 22

34 35
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE SOLUTION
Motor not running,
running slow or
getting hot
Fault in line or insufficient voltage Check the line
Power wire too thin or long Replace the wire
Faulty pressure switch Repair or replace
Faulty motor Repair or replace
Main compressor sticking Check and repair
Main compressor Sticking
Seized due to insufficient oil
Check crankshaft, bearing, connecting rod, piston, piston ring etc.
Replace if necessary
Moving parts damaged by foreign body
Shaking or abnormal noise
Connecting parts loose Check and re-tighten
Foreign body in the main compressor Check and clean
Piston locking valve seat worn/torn Replace gasket
Moving parts seriously worn Repair or replace
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE SOLUTION
Pressure insufficient or
discharge capacity
decreased
Motor running too slow Check and remedy
Air filter clogged clean or replace
Safety Valve leaking Check and adjust
Discharge pipe leaking Check and repair
Sealing gasket damaged Check and replace
Valve plate damaged, stuck or carbon build up Clean or replace
Piston ring and cylinder worn or damaged Repair or replace
Excessive oil consumption
OIl level too high Keep oil level within set range
Breather pipe choked up Check and clean
Piston ring and cylinder worn or damaged Repair or replace