Parker LX80L Скачать руководство пользователя страница 28 | Manualshive

Страница: 28 / 56

background image

LX80L Series Product Manual

28

Parker Hannifin Corporation

EMN Automation - Parker
Irwin, Pennsylvania

•

The positioner must be mounted to a flat, stable surface, with a flatness error less than or equal to
0.025mm/300mm for operation or specifications will be greatly varied from published specification.
To meet catalog specifications the surface must have a flatness error less than or equal to
0.003mm/300mm for Standard grade and 0.001mm/300mm for Precision grade.

•

Catalog specifications may deviate for positioners mounted to surfaces that do not meet the above
conditions.

•

If the intended mounting surface cannot meet these specifications a separate rigid mounting plate
meeting these specifications should be used to mount to the main structure.

•

If mounting conditions require that the table base is overhung, table specifications will not be met
over that portion of the table. Additionally, in X-Y Systems the overhung portion of the Y-axis may
not met specifications due to the additional error caused by deflection and non-support of the
base. Contact Parker for guidelines on specifications of overhang applications.

•

Dowel holes are included in the base of the LX80L for repeatable mounting of the positioner.

•

When mounting the positioner in the Standard Mounting position, it is necessary to remove the top
cover to gain access to the inner row of counterbored holes. Care must be taken when removing
the cover because there are spacers between the endblocks and the top cover. If these spacers
are omitted at reassembly, the top cover will interfere with the carriage.

Load Mounting Requirements

Dowel holes are included in the top of the carriage of the LX80L for repeatable mounting of loads/fixturing.

Use appropriate length bolt.

The LX80L compact design requires proper sized bolts to be used when mounting payloads to the car-
riage. Excessive length bolts can damage bearings or pin the table in position.

When mounting payload to the top of the
carriage, note that there is only 7mm of
thread engagement in the mounting holes.
When mounting payload to the side of the
carriage, note that there is only 4mm of
thread engagement in the mounting holes.

There are two (2) dowel holes on the load
mounting surface for repeatable payload
mounting. These pins are sized for 4mm
diameter pins.

Carriage side
mounting
surface

Carriage top

mounting

surface

«
...
26
27
28
29
30
...
»

Содержание LX80L

























































Отзывы:

Нет отзывов

Похожие инструкции для LX80L

Бренд: Campden instruments Страницы: 8

ImageQuant LAS 4000

Бренд: GE Страницы: 86

Бренд: GE Страницы: 160

Бренд: GE Страницы: 134

Бренд: Raymarine Страницы: 90

Бренд: Badger Meter Страницы: 16

Бренд: EuroLite Страницы: 28

Бренд: T&D Страницы: 28

Бренд: Öhlins Страницы: 8

Бренд: ?HC Страницы: 2

Бренд: Calibre Fitness Страницы: 11

Бренд: SAC Страницы: 2

Бренд: Milestone Страницы: 64

Ology Walkstation 1451458001

Бренд: Steelcase Страницы: 38

FUSION Equine DR II

Бренд: SOUND Страницы: 178

ENIDINE ENI-VIBE 33VC4400B

Бренд: Dytran Страницы: 2

GQM2195C2E7R5CB12D

Бренд: Murata Страницы: 25

Бренд: Mecc Alte spa Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды