Parker KarryFlare, Руководство по эксплуатации

Страница: 18 / 26

KARRYFLARE - Operating Manual
5
6. Initial Operation

Open cover by loosening front screw. For stationary operation the cover
can be removed completely.

Take care that the machine cannot slip away at assembly. It might be
necessary to support the machine when flaring large diameter tubes

Take care that only actual Parker flaring dies are used.

Make sure that die sets and flaring pin are clean and free of wear or
damage.

Turn the tank cap on the hand pump to position “VENT”.

Unlock transportation clip from hand pump lever.

Do some test flarings to familiarise with the operation and the tool
handling.

Carefully check the flaring result according to the Triple-Lok
®
assembly
instructions.

Attention! Never operate the unit without tools!