52
Parker Hannifin Corporation
Hydraulic Pump/Motor Division
Greeneville, Tennessee USA
HY13-1524-002-M1/US
Assembly
Service Manual
HTG Series Integrated Hydrostatic Transmission
HY13-1528-001-M1/US—HTG Series Service Manual
Reassembly
Step
Instruction
Illustration
Oil shaft.
Insert shaft into housing.
Apply HT-1000™ oil to help shaft pass
through the lip of shaft seal package.
1. Slightly rotate shaft while pushing down
so that it passes through the seal pack-
age and bottoms on top of the thrust
washer.
2. The top of the shaft should be flush
(even) with the radial bearing face.
Install drive link.
1. Install drive link into the coupling shaft.
Install thrust bearing.
Install thrust bearing over the drive link onto
the end of coupling shaft
2. Align marks on coupling shaft and drive
link.
NOTE:
Refer to picture for orientation.
