manualshive.com logo in svg

Parker Helac PowerTilt PT Series, Руководство по обслуживанию и ремонту

Поделиться
Скачать
Parker Helac PowerTilt PT Series Скачать руководство пользователя страница 9

PowerTilt Tilting Coupler

PowerTilt Series Service & Repair Manual

HY34-1410  

9

Parker Hannifin Corporation

Helac/Cylinder Division

Enumclaw, Washington USA

www.parker.com/helac

PT Series — Mounting a Bucket or 

Attachment to the PowerTilt 

To mount a bucket or an attachment to the 

PowerTilt with the Standard Pin-on Coupler, 

follow the steps listed below.

1.

  Install the hook pin in the bucket or 

attachment and position the bucket or 

attachment so the pin can be easily reached 

with the PowerTilt hook as shown in the below 

image.

2.

  Hook the bucket pin, being sure the hook is 

properly aligned to avoid damaging the hook.

3.

  Lift the bucket off the ground, then extend 

the bucket cylinder to pivot the PowerTilt until 

the second hole of the bucket or attachment 

aligns with the PowerTilt coupler pin hole.

4.

  Install the second pin and retain properly.

5.

  After mounting the bucket for the first time, 

the jacking bolt(s) on the back side of the 

hook require adjustment. Loosen the jam nut 

and thread the bolt until it touches the pin, 

then tighten the jam nut to lock the bolt in 

place. Proper adjustment will make it easier 

to align the mounting pins when changing 

buckets.

PT Series — Removing a Bucket or 

Attachment from the PowerTilt

To remove a bucket or an attachment from the 

PowerTilt with the Standard Pin-on Coupler, 

follow the steps listed below.

1.

  Position the bucket or attachment so it is 

lightly supported by the ground and in a 

position so it will not move or fall when a pin 

is removed.  Remove the coupler pin (the pin 

furthest from the cab).

2.

  Gently place the bucket or attachment on 

the ground and move the PowerTilt away 

from the bucket or attachment to disengage 

completely. Use the bucket cylinder if 

necessary to make disengagement easier. 

Be careful not to damage the PowerTilt hook 

while removing the bucket or attachment.

Attachment  Removal

   Attachment  Mounting

Installation and Maintenance

Installation and Mounting

Содержание Helac PowerTilt PT Series





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды