manualshive.com logo in svg

Parker Helac PowerTilt PT Series, Руководство по обслуживанию и ремонту

Поделиться
Скачать
Parker Helac PowerTilt PT Series Скачать руководство пользователя страница 8

PowerTilt Tilting Coupler

PowerTilt Series Service & Repair Manual

HY34-1410 

8

Parker Hannifin Corporation

Helac/Cylinder Division

Enumclaw, Washington USA

www.parker.com/helac

NOTICE   

  Do not attach a bucket or 

attachment to the PowerTilt until 

the hydraulic tool circuit for the 

PowerTilt is installed and operating 

correctly.

Each PowerTilt is engineered for a specific 

backhoe or excavator and is designed to be pin 

mounted directly to the machine. When using 

the Standard Pin-on Coupler, two sets of pins 

are required: one set to mount the PowerTilt to 

the dipper stick and a second set to mount the 

bucket or attachment to the PowerTilt. When 

using Universal or Hydraulic Quick Couplers, 

contact the respective coupler manufacturer for 

instructions and maintenance.

PT Series — Installing the PowerTilt 

onto the Carrier

All PowerTilt models should be mounted to the 

carrier according to the instructions outlined 

below.

1.

  Position the PowerTilt close to the carrier 

boom to ensure easy use of the lifting reach 

and range of the carrier boom.

2.

  Lower the dipper to approximately 2-3 inches 

(50-75 mm) above the PowerTilt. Roll out the 

bucket cylinder to lower the link bars to the 

PowerTilt.

3.

  Align the PowerTilt and link bar holes and 

install the link pin.

4.

  Slowly lift the PowerTilt to a safe height with 

the bucket and boom cylinders.

5.

  Curl the bucket cylinder until the PowerTilt 

and dipper holes align and install the bucket 

pivot pin. Rotate the pins as necessary and 

install the required retainers.

  PowerTilt Installation

Installation and Maintenance

Installation and Mounting

Содержание Helac PowerTilt PT Series





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды