2
Parker Hannifin
Pump and Motor Division
Trollhättan, Sweden
Hydraulic Saw Motors
Series F11iP
Bulletin HY30-8251/UK
Application Guide
Conversion factors
1 kg ................................................................. 2.20 lb
1 N ............................................................... 0.225 lbf
1 Nm ......................................................... 0.738 lbf ft
1 bar ..............................................................14.5 psi
1 l ......................................................0.264 US gallon
1 cm
3
........................................................0.061 cu in
1 mm ............................................................. 0.039 in
9
/
5
°C + 32 ..............................................................°F
DECLARATION BY THE MANUFACTURER
(Directive 98/37/EG, Art. 4.2 and Annex II, sub B)
PROHIBITION TO PUT INTO SERVICE
Parker Hannifin AB Trollhättan declare with this declaration that our products:
- Are intended to be incorporated into machinery or to be assembled with other machinery to constitute
machinery covered by Directive 98/37/EG.
- Are in accordance with technical specification stated in our product catalogue.
- And furthermore declares that it is not allowed to put the machinery into service until the machinery into
which it is to be incorporated or of which it is to be a component has been found and declared to be in
conformity with the provisions of Directive 98/37/EG and with national implementing legislation, i.e. as a
whole, including the machinery referred to in this declaration.
Parker Hannifin AB
Trollhättan
Lars Eliasson
Lean and Quality Manager.
FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN
OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.
This document and other information from Parker-Hannifin Corporation, its subsidiaries and authorized distributors provide
product or system options for further investigation by users having technical expertise.
The user, through its own analysis and testing, is solely responsible for making the final selection of the system and components
and assuring that all performance, endurance, maintenance, safety and warning requirements of the application are met. The
user must analyze all aspects of the application, follow applicable industry standards, and follow the information concerning
the product in the current product catalog and in any other materials provided from Parker or its subsidiaries or authorized
distributors.
To the extent that Parker or its subsidiaries or authorized distributors provide component or system options based upon data or
specifications provided by the user, the user is responsible for determining that such data and specifications are suitable and
sufficient for all applications and reasonably foreseeable uses of the components or systems.
WARNING – USER RESPONSIBILITY
Contents
Page
The optimal saw motor ............................................ 3
Specifications .......................................................... 4
Ordering information ................................................ 4
Standard model numbers ........................................ 4
Hydraulic fluids ........................................................ 4
Chain saw function .................................................. 5
Installation dimensions - left hand operating motor ........6
Installation dimensions - right hand operating motor .....7
