Parker EME/ EMN
Introduction
192-550002N2 ETH Mounting instructions March
2011
11
1.5.1.
Special notes on transport
Special notes on transport
Use only transport equipment with sufficient lifting capacity. When using ropes, make
certain they are not twisted or knotted. If you are using more than one rope, all the ropes
should be equally taut.
When transporting the ETH with a forklift, establish a condition of equilibrium and secure
the load if necessary.
Never step under overhead loads - danger of being injured!
Moving parts must always be secured against slipping or moving.
Required minimum load bearing capacity of the means of transport:
ETH032
ETH050
ETH080
130 kg
300 kg
750 kg
In these table values, a safety factor of S=8 is taken into consideration (motor and gearbox weight
included). This means that it does
not
represent the cylinder weight.
The following threads on the cylinder can be used to mount transport or mounting
equipment (for example eye bolts):
Motor inline:
Motor parallel
ETH032
ETH050
ETH080
DD
M6x1.0
M8x1.25
M10x1.5
JJ*
M6x1.0
M8x1.25
M10x1.5
BH
9
12.7
17.5
BG
16
25
26
* screw
“JJ” is not available in IP65 for the ETH32 and the ETH50!
DD
BG
BH
JJ
