Parker Hannifin Corporation
Automation Actuator Division
Wadsworth, OH 44281
25
Automation
ET Series
PM-ET01/USA
Stepper and Servo Driven Linear Actuators
Conduit Connector
(Motor Codes 22, 32, and 42)
For applications requiring additional wiring rigidity
and protection, a conduit connector option can be
specified. It allows for the installation of customer
specific connectors. Wiring is cut short (approx. 2
in.) into flying leads from motor end cap. Color
coding is identical to the standard motor option.
Stepper Motor Options
Brad Harrison Connector
(Motor Codes 23, 33, and 43)
Brad Harrison connectors feature quick disconnect
to reduce downtime to a minimum for maximum
performance and reliability in high-speed operations.
Molded connectors provide a positive seal against
moisture and contaminants. Contacts are keyed to
avoid mismating for fast, sure connection.
•
•
•
•
•
•
•
•
•
Red
Red/Black
Green
Red/White
Red/Orange
•
•
•
•
•
Red
Red/Black
Green
Red/Orange
Red/White
A +
A -
Earth
B +
B -
PDS Drive, PDX Drive/Indexer Motor
wired in series
5 Pin Phoenix® Connector
Wiring Diagrams for Brad Harrison
Connnector (Motor Codes 23, 33, and 43)
ZETA4/ZETA6104 or S/SX Motor
wired in series
9 Pin Phoenix® Connector*
Inlk
A-CT
A +
A -
Earth
B +
B -
B-CT
Inlk
Mating Cable supplied with connector option, Cable
length 3.7 meters (12 ft); includes mating Brad Harrison
connector one end, and nine, seven, or five pin Phoe-
nix® connector at other end.
* Motor Code 4* (S106-178) includes 7 pin Phoenix®
Connector. Connector is wired the same as 9 pin
version, however without A-CT or B-CT.
