INSTALLATION & MAINTENACE MANUAL
RCOe2100/03.06
21
3 – HANDLING AND STORAGE
This section contains the instructions essential to operators for packing removal and motors handling. The
information of this section is intended for Qualified Technical personnel (Mechanical and Electrical
Maintenance Technicians) with adequate skills to work appropriately and safely with lifting equipment,
harnesses, lift trucks, bridge cranes, etc.
Only Qualified Technical Personnel, trained in the specific field of intervention, should
perform lifting, handling and placement activities as well as execute mechanical,
hydraulic and electrical connections.
3.1 – Supply Conditions
The motors are supplied in the following conditions:
for shipments within Italy, motors are packed and fixed to skids (pallets);
for international shipments, motors are packed in dedicated cardboard or wooden crates, according
to the type of shipment (truck, ocean freight, air freight) and to specific customers’ requests;
all parts of the motor are protected by a layer of anti rust coating, while delicate external parts (pipe
connection flange, drain holes, output shaft) are equipped with a special protection cover;
motors to be shipped by ocean freight are placed inside dedicated humidity absorber plastic bags;
motors might be painted according to specific customers’ requests. The coupling surfaces are not
painted;
motors are supplied with empty motor case; the motor internal components are protected by the
layer of oil residual from the test performed before delivery;
all motors before shipment are tested according to Parker Calzoni s.r.l. internal functional test
procedures.
Shipment on
wooden skids
