Date of Issue: 19 August 2021
Page 5 of 24
QF 80: Issue 2
Parker Hannifin
– Instrumentation Products Division Europe
President Park, President Way, Sheffield,
South Yorkshire, S4 7UR, United Kingdom
Tel: +44 (0) 114 224 0000 Web: www.parker.com/ipd
Globe / Needle Valve (DN10 (⅜”) – DN50 (2”)
Reference Number:
IOM 002
Date:
20 May 2014
Issue:
B
Introduction
Outline
This manual is broken down into separate sections:
•
Introduction
This section provides information about important safety requirements as well as highlighting
the precautions taken at Bestobell Valves to ensure the cleanliness of our products. Details
regarding servicing are also introduced.
•
Installation
This details the method of installing the valve on site, and includes information on storage,
unpacking and inspection. Preparation of the valve and site is also discussed to allow ease of
installation and operation.
•
Hardware Description
Introduces the product as well as providing a more detailed description including operating
conditions and suitable media. Any further requirements for the effective operation of the valve
are also discussed.
•
Maintenance
Provides information relating to the on-site maintenance of the supplied valve, as well as
discussing common problems and solutions.
Safety
Read and understand these instructions before installing the valve. Improper installation,
operation or maintenance by the owner or operator of this valve can result in personal injury.
Only use genuine Bestobell Valves spares to ensure safe and optimum performance.
Prior to the installation of the valve into the system and any maintenance work, ensure the system is
de-pressurised and isolated for the duration of the installation and during any subsequent
maintenance.
The valve must be installed within a system that has adequate draining and venting provisions.
In cryogenic applications the area of pipe-work to receive the valve must be allowed to reach ambient
temperature.
It is essential that the installers and operators are conversant with all of the safety issues relating to
the medium within the system, and are fully trained to an adequate standard.
Wear safety glasses and gloves during any installation or operation of the valve.
