Parker Adrian Belew Signature Fly, Руководство пользователя

Страница: 22 / 24

|
w w w . p A r k e r g u i t A r S . c O M
|
22
|
w w w . p A r k e r g u i t A r S . c O M
|
interFAce
Signals from your Adrian Belew Signature Fly are available in two forms.
1/4” cOurteSy Output
this mono phone jack brings out a signal directly from the diMarzio
magnetic pickup in the bridge position. its only intended use is to connect
a strobe tuner before going on stage. none of the guitar’s controls operate
on this signal, and it includes none of the advanced features available in
the instrument. it should not be used for performing, although at informal
rehearsals you may find it satisfactory when connected to a small practice
amp.
13-pin SyntheSizer Output
this is the main output of the instrument. All of the guitar’s controls operate
on this output, and all of the advanced functions are available here.
AdriAn’S perSOnAl Setup
here’s what Adrian had to say about his personal setup prefrences:
String gAugeS
“i use a super light top/regular bottom gauge of strings.”
neck
“i like the action normal, not too high or too low.”
Bridge
“Very importantly I keep the trem in free-floating mode which allows me to
bend up a third and down as far as i like.”
AlternAte tuningS
“i currently use standard tuning for most everything i do, but i also
incorporate this tuning: dAddAd in some of my material”