Parker AC10 series, Руководство по эксплуатации продукта, Страница: 9 / 72

1-7
English
Keypad
Press “M” key to display function code
Press “Up” or “Down” to select required function code
Press E to read data set in the function code
Press “Up” or “Down” to modify data
Press M to show corresponding target frequency by flashing after saving the set data
Press E to display the current function code
“DIGIT” (DGT) 4 LEDs indicate working status. RUN while running. FWD
running forward and FRQ when the MMI is showing frequency.
LED shows running frequency, flashing target frequency,
function code, parameter value or fault code.
Press “M” for function code, and “E” for original parameters.
▲
and
▼
keys can be used to select function codes and
parameters. Press “E” again to confirm. In the mode of keypad
control,
▲
and
▼
keys can also be used for dynamic speed
control. “I” and “O” keys control start and stop. Press “O” key to
reset inverter in fault status.
30kW – 180kW Basic Wiring Diagram for Three-phase AC drives (NPN type)
This manual was downloaded on www.sdsdrives.com
+44 (0)117 938 1800 - info@sdsdrives.com