Parker 890CA, Быстрый старт

Страница: 6 / 20

Page 6
Installation
Mount the 890CA unit(s) side-by-side with the 890CD units so that the SSD_Rail busbar system can
be used. The 890CA is dimensionally the same as the Frame B 890CD unit.
Dimensions
41
3
.6
72.4
36.2
4
21
.6
57
57
12.5
25
258.5
238.6
X
X
4
3
3
.6
260
Y
B
Dimensions are in millimeters ( X : Power Bracket - 890 Installation Kit )
The units must be installed in an enclosure. Mount the drive using the keyholes and slots or on a
35mm DIN rail using the 890 Installation Kit supplied.
890 Installation Kit
The 890 Installation Kit is shown in the diagram attached to the bottom of
the 890CA unit.
The kit provides several options for earth/ground connections. It also
includes the brackets for DIN rail mounting the unit. Refer to the instructions
in the kit and use the appropriate parts.
Permanent Earthing
The unit must be permanently earthed according to EN 50178: For
permanent earthing, one conductor, PE1, of >10mm² cross-section is
required; or two individual incoming protective earth conductors, PE1 &
PE2, of <10mm² cross-section. Each earth conductor must be suitable for
the fault current according to EN 60204.