Parker 890CA Скачать руководство пользователя страница 1

890 

Quickstart 

Manual 

 

890CA (Common Bus) Adaptor 

 

 

 

HA469250U000  Issue 3 (ISO A4) 

HA469250U001  Issue 3 (American Quarto) 

 

 

©

 Copyright 2009 Parker Hannifin Ltd. 

All rights strictly reserved. No part of this document may be stored in a retrieval system, or transmitted in any 
form or by any means to persons not employed by a Parker Hannifin Ltd., Automation Group, SSD Drives 

Europe, without written permission from Parker Hannifin Ltd . Although every effort has been taken to ensure 
the accuracy of this document it may be necessary, without notice, to make amendments or correct omissions. 
Parker Hannifin Ltd., Automation Group, SSD Drives Europe, cannot accept responsibility for damage, injury, 

or expenses resulting therefrom.

 

WARRANTY 

Parker SSD Drives warrants the goods against defects in design, materials and workmanship for the 

period of 24 months from the date of manufacture, or 12 months from the date of delivery (whichever is 

the longer period) on the terms detailed in Parker SSD Drives Standard Conditions of Sale IA500504. 

 

Parker SSD Drives reserves the right to change the content and product specification without notice.

 

Содержание 890CA





















Отзывы: