Parker 590 series Скачать руководство пользователя страница 6

Parker Hannifin Corporation

Chelsea Products Division

Olive Branch, MS 38654  USA

2

Bulletin HY25-1590-M1/US

Owner’s Manual

590 Series

General Information

Cold Weather Operation of PowerShift PTO

  WARNING: During extreme cold weather operation [32°F (0°C) and 

lower], a disengaged PowerShift Power Take-Off can momentarily transmit high 
torque that will cause unexpected output shaft rotation. This is caused by the 
high viscosity of the transmission oil when it is extremely cold. As slippage occurs 
between the Power Take-Off clutch plates, the oil will rapidly heat up and the 
viscous drag will quickly decrease.

The Power Take-Off output shaft rotation could cause unexpected movement of 
the driven equipment resulting in serious personal injury, death, or equipment 
damage.

To avoid personal injury or equipment damage:

   Driven equipment must have separate controls.

   The driven equipment must be left in the disengaged position when not in  

 operation.

   Do not operate the driven equipment until the vehicle is allowed to warm up.

Rotating Auxiliary Driveshafts

  

WARNING:   

   Rotating auxiliary driveshafts are dangerous. You can snag clothes, skin, hair,  

 

hands, etc. This can cause serious injury or death.

   Do not go under the vehicle when the engine is running.

   Do not work on or near an exposed shaft when the engine is running.

   Shut off the engine before working on the Power Take-Off or driven  

 equipment.

  Exposed rotating driveshafts must be guarded.

Guarding Auxiliary Driveshafts

  WARNING: We strongly recommend that a Power Take-Off and a directly 

mounted pump be used to eliminate the auxiliary driveshaft whenever possible. 
If an auxiliary driveshaft is used and remains exposed after installation, it is the 
responsibility of the vehicle designer and PTO installer to install a guard.

Safety Information (continued)

This symbol warns of possible personal injury.

Содержание 590 series





























Отзывы: