manualshive.com logo in svg

Parker 44 Series, Информация по установке и запуску, Страница: 8 / 16

Поделиться
Скачать
Parker 44 Series Скачать руководство пользователя страница 8

Bulletin MSG30-3245-INST/UK 

Installation Manual

8

Parker Hannifin

Pump & Motor Division Europe

Chemnitz, Germany

Axial Piston Pump

Series PV, series 44 and higher

6.  Remote pressure compensator, 

codes ...MRC, ...MR1 and ...MRZ

The remote pressure compensators code ...MR* 

are equipped with a remote control port. To this 

port external pilot valves can be connected. The 

distance between pump and pilot valve can be up 

to 15 m. The pilot line should be designed, to avoid 

pressure losses.

Especially at low environmental temperatures a 

too narrow pilot line can result in a significant pres-

sure increase. The nominal pilot flow is in the range of  

1.2 to 1.4 l/min. 

Beside the version shown above (code ...MRC) 

also a version ...MR1 with a topside NG6 / D03 inter-

face is available as well as a version ...MRZ without 

integrated pilot valve for the use with compensator 

accessories code PVAC... .

For the compensators with code ...MM* and 

...MR* the pilot pressure pressure supply is main-

tained through an orifice located in the control spool. 

pilot orifice

integrated pilot valve

pressure

pilot chamber

control spool

compensator differential adjustment

lock nut

remote control port

lock nut

compensator pressure adjustment

The load sensing or flow compensator primarily 

controls the pump output flow. To achieve this the 

load pressure after a main stream throttle valve (load 

sensing valve, not included in the shipment of the 

pump) is connected to the load sensing port of the 

compensator. The compensator control strategy is, 

to keep the pressure drop constant across this main 

stream throttle valve.
The integrated pilot valve maintains a pressure 

compensation when the adjusted max. pressure is 

reached. The pilot orifice Ø 0,8 mm is located in the 

load sensing port adapter. This orifice replaces the 

orifice in the control spool of the ...MM* and ...MR* 

compensators, because pilot pressure is in the load 

sensing compensator provided through the load 

sensing line.

compensator differential adjustment

lock nut

load sensing port

lock nut

compensator pressure adjustment

Load sensing and pressure compensators only dif-

ferentiate by the control spool and by the location of 

the pilot orifice.
Beside the version shown above (code ...MFC) also 

a version ...MF1 with a topside NG6 / D03 interface 

is available as well as a version ...MFZ without 

integrated pilot valve for the use with compensator 

accessories code PVAC... .
The following port options are available for remote 

pressure and load sensing compensators:

thread and 

port code

port thread  

dimensions

1

G 1/4 BSPP

3

7/16-20 UNF

7, 8

M12 x 1,5 ISO 6149-1

7.  Load sensing compensator, codes 

...MFC, ...MF1 and ...MFZ

Содержание 44 Series

















Отзывы:

Нет отзывов