6-2
AC10 Inverter
6.1.1 Function Codes Switchover in/between Code-Groups
It has more than 300 parameters (function codes) available to the user, divided into sections
as indicated in Table 6-3.
Table 6-3 Function Code Partition
Group Name
Function
Code Range
Group
No.
Group Name
Function
Code Range
Group
No.
Basic Parameters
F100
~
F160
1
Timing control
and protection
function
F700
~
F770
7
Run Control Mode
F200
~
F280
2
Parameters of the
motor
F800
~
F850
8
Multi-functional
input/output terminal
F300
~
F340
3
Communication
function
F900
~
F930
9
Analog signals and
pulse of input/output F400
~
F480
4
PID parameter
setting
FA00
~
FA80
10
Multi-stage speed
Parameters
F500
~
F580
5
Torque control
FC00~FC40
11
Subsidiary function F600
~
F670
6
As parameter setting can take time due to numerous function codes, such function is specially
designed as “Function Code Switchover in a Code Group or between Two Code-Groups” so
that parameters setting becomes convenient and simple.
Press “M” key so that the keypad controller will display function code. If user presses “▲” or
“▼” key, the function code will circularly keep increasing or decreasing by degrees within the
group; if user presses the “O” key again, the function code will change circularly between two
code groups when operating the “▲” or “▼” key, e.g. when function code shows F111 and
DGT indicator is on, press “▲”/ “▼” key, function code will keep increasing or decreasing by
degrees within F100
~
F160; press “O” key again, DGT indicator will be off. When pressing
“▲”/ “▼” key, function codes will change circularly among the 10 code-groups, like F211,
F311…FA11, F111…, Refer to Figure 6-1 (The flashing “
is indicated the corresponding
target frequency values).
(The flashing “
is indicated the corresponding target frequency values).
Figure 6-1 Switch over in a Code Group or between Different Code-Groups
Enter correct user’s password
(currently showing
50.00
)
M
Display
Display
DGT
Display
DGT
▲
Display
▲
Display
▲
Display
DGT Off
DGT On
F100
F211
F111
F311
F911
O
O
Содержание 10G-46-0600-BF
